The world of saws is remarkably complex, especially for those who are beginners in woodworking. Finding the best one for your needs among a lot of saws is a very tough job. Each saw has different functions for various situations. You need to know all of them and their features before using them.
Every woodworker usually creates confusion in this case between jigsaw and bandsaw due to their respective functionalities. If you are one of the beginners, you might also be confused like the other woodworkers.
Once you want to start any DIY woodworking project, you may have to build a few cabinets and shelves. During the procedure, you will need to cut various curves, but you might not be sure which saw you should use.
If you keep in mind what the differences are between a jigsaw and a Bandsaw, you will make the right decision. Here we’ve shared some vital differences that will help you to pick up the right one.
Jigsaw vs Bandsaw
Jigsaw and bandsaw usually look similar. Both saws have thin blades for cutting straight lines and the corner in a wood piece. The jigsaw is better to make curves while a bandsaw is preferred cutting lines and even for re-sawing the thin wood pieces.
Again, a jigsaw is one of those convenient tools which you can use for several types of necessary cuts. But, a bandsaw works well for re-sawing. The saw is also expensive and a bit dangerous to use. Therefore, you should use it only when you have something important to cut.
What the Differences
Although both jigsaw and bandsaw can cut curves, they cannot be interchangeable. The functionality of both saws is different. When you are going to choose one of them, you must think in advance what the differences are between both saws.
The jigsaw is mainly used for making intricate, narrow cuts while the bandsaw is responsible for making broader cuts. With a jigsaw, you can make all types of curves while the bandsaw is capable of re-sawing with either manual tools or table saw tools.
Besides, the jigsaw is suitable for rough cutting and general cutting purposes, and it is a convenient tool to use when it is not so precise. But the bandsaw is used for accurate large-scale cutting. It is, in most cases, used to cut larger pieces of lumber and wood.
They both can make curves of all types. But if you need to make more curves, the jigsaw is the more suitable option.
We cannot say that one saw is better than the other. It entirely depends on your requirements, expertise, and skills. According to our analysis, the functionality of both saws relies on the material, cutting type, and blade condition.
Every person should have a band saw if he prefers heavy re-sawing and woodcutting. The woodworkers, who want to have such a handy tool that can make more straightforward cuts, should pick up a jigsaw. Both of the saws will help you learn the types of wood cutting techniques as well.
For heavy use, we recommend you a bandsaw, but if you are going to simple woodworking, you have to prefer a jigsaw. However, the bandsaw has a higher probability of causing injuries while the jigsaw comes with low risks.